Characterization of boron nitride nanosheets synthesized by boron-ammonia reaction

Boron nitride nanosheets (BNNS) with thickness 5–11 nm were successfully produced when pure boron powder (1–2 μm) interacted with ammonia gas in chemical vapour deposition set up. Under the optimized parameters, at 1200 °C and for uninterrupted 1 h of reaction duration, 2D BNNS with thickness of ca.11 nm were synthesized. BNNS were characterized by X-ray diffraction (XRD) for crystal structure, scanning electron microscopy for dimensions and morphology, energy dispersive X-ray analysis for chemical composition and Fourier transform infrared spectroscopy for sp² BN bond detection. The thickness of BNNS determined from both XRD data (using Scherrer equation) and atomic force microscopic analysis confirmed the stated product thickness. The BNNS obtained at 1200 °C had high crystallinity, purity and yield.     

基于STM32的开环霍尔电流传感器的温度补偿研究

研究了一种基于软件补偿结合恒流源补偿的改进温度补偿方法,应用单片机、恒流源、数字温度传感器、乘法器等硬件电路,对传统软件补偿进行了优化,补偿效果较传统恒流源补偿有了明显提升,“温漂”整体下降了约13.7%。在传统的温度补偿方法如热敏元件补偿、恒流源补偿、软件补偿等方式上做了补充,对于霍尔电流传感器精度的提升及实际生产需求的满足有重要意义。     

基于数据拼接的金刚石刀具刃口三维形貌表征技术

原子力显微镜(AFM)是获取金刚石刀具刃口纳米级三维形貌的重要手段,但其存在测量范围小,难以表征参与切削区域整段刃口形貌特征的问题。采用基于迭代最近点法的刃口AFM测量数据拼接算法,获得了由多组数据拼接得到的刃口纳米级三维形貌,并进行了切削实验验证。实验结果表明,采用的数据拼接方法可较好地用于表征刀具刃口三维形貌。     

Multicellular Tumor Spheroids (MCTS) as a 3D In Vitro Evaluation Tool of Nanoparticles

Multicellular tumor spheroid models (MCTS) are often coined as 3D in vitro models that can mimic the microenvironment of tissues. MCTS have gained increasing interest in the nano‐biotechnology field as they can provide easily accessible information on the performance of nanoparticles without using animal models. Considering that many countries have put restrictions on animals testing, which will only tighten in the future as seen by the recent developments in the Netherlands, 3D models will become an even more valuable tool. Here, an overview on MCTS is provided, focusing on their use in cancer research as most nanoparticles are tested in MCTS for treatment of primary tumors. Thereafter, various types of nanoparticles—from self‐assembled block copolymers to inorganic nanoparticles, are discussed. A range of physicochemical parameters including the size, shape, surface chemistry, ligands attachment, stability, and stiffness are found to influence nanoparticles in MCTS. Some of these studies are complemented by animal studies confirming that lessons from MCTS can in part predict the behaviour in vivo. In summary, MCTS are suitable models to gain additional information on nanoparticles. While not being able to replace in vivo studies, they can bridge the gap between traditional 2D in vitro studies and in vivo models.     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

微覆盖解决高低层混合居民楼深度覆盖的应用

城区高低层混合居民楼区域作为无线网络覆盖难点,传统宏站无法进行有效的覆盖。本文通过采用“微覆盖、微对打”的建设方式有效解决“高低层混合居民楼”无线网络信号的深度覆盖问题。     

机电控制无级变速器执行机构动态响应特性仿真研究

为研究夹紧力可调的机电控制无级变速器（EMCVT）电控电动执行机构的可靠性，及其速比和从动带轮夹紧力动态响应的影响因素，采用MATLAB/Simulink构建了EMCVT执行机构的动力学模型，设计了针对EMCVT电控电动执行机构的速比和夹紧力闭环控制器。对EMCVT输入转矩突变和目标速比突变两种工况进行了仿真分析，仿真结果表明：速比和从动带轮夹紧力动态响应的超调量和调节时间满足CVT的使用要求，从动带轮夹紧力响应时间小于1s，速比变化率可以达到2；EMCVT速比和从动带轮夹紧力动态响应的主要影响因素是执行电动机的负载和转动方向。     

六盘水市煤炭行业竞争战略分析

我国是富煤贫油少气的国家，煤炭是我国最重要的一次能源。但从能源激烈的竞争市场环境而言，当前我国煤炭行业发展出现了困境。为了更好地发展六盘水地区的煤炭行业，结合竞争战略理论和六盘水市的煤炭行业发展状况，运用PEST分析法和波特五力模型对六盘水市煤炭行业进行分析，得出整合资源，结合自身优势大力吸引人才，最终达到产业转型的生态化煤炭发展战略模型。分析结果可为提高六盘水煤炭行业竞争力提供理论支持。     

Heat Transfer Analysis of MHD Power Law Nano Fluid Flow through Annular Sector Duct

Flow and heat transfer analysis of an electrically conducting MHD power law nano fluid is carried out through annular sector duct,under the influence of constant pressure gradient.Two types of nano particles(i.e.Cu and TiO2)are used in power law nano fluid.Strongly implicit procedure,(SIP)is used to simulate the discretized coupled algebraic equations.It has been observed that volume fraction of nano particles,ϕand magnetic field parameter,Ha are favourable for the heat transfer rate,however,both resist the fluid flow.Impact of applied uniform transverse magnetic field exceeds in the case of shear thickening fluids(i.e.n>1)by increasing the value of Ha as compared to that in shear thinning fluids(i.e.n<1).Therefore,enhancement in heat transfer rate is comparably more in shear thickening fluid.Furthermore,comparable limiting case study with published result is also carried out in this research paper.     

基于双向流固耦合弹性环式挤压油膜阻尼器建模及动力学特性研究

利用数值方法建立了弹性环式挤压油膜阻尼器(ERSFD)的流固耦合模型,分别利用有限元方法以及有限体积法建立了弹性环和内外油膜的CFD数值模型,并进一步利用分时迭代的弱耦合方法实现了油膜以及弹性环控制方程的耦合求解,获得了内油膜的压力分布特性及弹性环的变形,并进一步识别了油膜和弹性环的动力学特性系数;研究了涡动频率、凸台数目、凸台高度、凸台宽度以及弹性环厚度对阻尼器动力学特性系数的影响。结果表明,弹性环的凸台高度对ERSFD油膜动力学特性系数的影响最为明显,ERSFD油膜阻尼与涡动频率无关。